Tubelight Multi LV Pro by Display Lighting Ltd
"Particularly suited for incorporating into Estate Agents, Letting Agents Window Displays..."
SPECTRUM LV PRO MR11 12V Spotlights
SPECTRUM LV PRO MR16 12V Spotlights
S114
S124
MR8/MR11 35W Max
Cap - GU4
MR16 50W Max
Cap - GU5.3
S113
S123
MR11 20W Max
Cap - GU4
MR16 35W Max
Cap - GU5.3
S112
S122
MR8/MR11 35W Max
Cap - GU4
MR16 50W Max
Cap - GU5.3
S111
S121
MR11 20W Max
Cap - GU4
MR16 35W Max
Cap - GU5.3
S115
S125
MR8/MR11 35W Max
Cap - GU4
MR16 50W Max
Cap - GU5.3
TUBELIGHT MULTI LV PRO TUBE EXTENSIONS
TUBE DIAMETER - 9.65mm
Maximum Overall Length (including base) - 2050mm
Triple High Power LED Lamps
MR16-5-LED/MKV - Warm White
MR16-5-LED/MKVII - White
Life/Hours
Base
Input Voltage
Colour Temperatures
.
Beam Angle
30'000
GU5.3
12V DC (12V AC transformers will reduce life of lamp by up to half!)
MR16-5-LED/MKV - Warm White 2700k - 3500k
MR16-5-LED/MKVII - Cool White 7000k - 9000k
36 Degrees
MR16 Energy Saving Cost
Comparison
MR16
LED Lamp Data Sheet
Tubelight Multi LV Pro Bases/Fixings
RF10
FF10
Rear Fix Base Plate
Diameter - 22mm
Fixing - M10 X 50mm Thread c/w M10 Nut & Washer
(Various thread lengths available, please specify at time of order)
Front Fix Base Plate
Diameter - 30mm
Fixing - 2 concealed screws
CP10
Ceiling Plate
Diameter - 54mm
Fixing - 2 concealed screws
(Allows side cable entry and internal wiring connections)
ORDERING SPECTRUM LV PRO STEM LIGHTS TO YOUR SPECIFICATIONS
When ordering Tubelight Multi please use the following codes:
1. Configuration
e.g.
CS2 - 2 Way (180
º Spacing)CS4 - 4 Way (90º Spacing)
2. Overall height
e.g. 300 (300mm)
(Measured from the face of the display to top of spotlight, not including lamp)
3. Overall Width
e.g. 0 ("0" Denotes no tube extension but if wider luminaires are required please state overall width measured at widest point between 2 opposite spotlights)
4. Spotlights
e.g. S112 (Any of the 12V spotlights pictured above.)
4. Finish
.03 - Chrome
.05 - Brushed Chrome/Stainless Steel Effect
( .01 - White, .02 Black & .04 Brass are still available
but have been reclassified as non standard finishes and from the end of October
2005 will incur a setup charge to cover extra costs involved.)
5. Base Fixing
e.g. RF10 - Rear Fix Base Plate (Any of the Bases pictured above.)
Drawings can be faxed or emailed using the details below:
fax - 0161 929 3356
email - paul@display-lighting.com