spotlights-spectrummv

Spectrum™ ^{MV PRO}
Display Case Spectrum MV S134.250.RF10.03			Exhibition "Clamp On" Spectrum MV S134.350.DC10.03
PAR16 GU10 20W, 35W or 50W Halogen White	PAR16 GU10 20W, 35W or 50W Halogen Coloured	PAR16 GU10 1.5W LED Cluster Warm White or White UV, Blue, Pink, Green, Red, Yellow or Orange	PAR16 GU10 1.6W Colour Changing LED Cluster RGB	PAR16 GU10 7W, 9W or 11W Compact Fluorescent Warm White or Cool White	PAR16 GU10 Triple High Power Super Bright LED Mark II 3W Warm White Mark III 4W Cool White
Spectrum MV Spotlights shown below will accept the 240V halogen or LED lamps featured
S134 Cap - GU10 Lamp - 240V PAR16 50W Max			S133 Cap - GU10 Lamp - 240V PAR16 35W Max (Does not accept Compact Fluorescent Lamp)
S132 Cap - GU10 Lamp - 240V PAR16 50W Max			S131 Cap - GU10 Lamp - 240V PAR16 35W Max (Does not accept Compact Fluorescent Lamp)
S32 Cap - GU10 Lamp - 240V PAR16 Wattage - 20W, 35W or LED (Not adjustable)			S31 Cap - GU10 Lamp - 240V PAR16 Wattage - 20W, 35W or LED (Not adjustable) (Does not accept Compact Fluorescent Lamp)
Tube Extensions
TUBE DIAMETER - 9.6mm Display Lighting can manufacture and supply Spectrum MV in lengths between 100mm - 1060mm. The length is measured from the top of spotlight to underside of base plate.
Bases / Fixings

RF10 Rear Fix Base Plate Diameter - 22mm Fixing - M10 thread, nut & washer			FF10 Front Fix Base Plate Diameter - 30mm Fixing - 2 concealed screws

CP10 Ceiling Plate Diameter - 54mm Fixing - 2 concealed screws			SM10 Recessed Ceiling Plate Diameter - 70mm Cut-out - 60mm

EC10 Adjustable Length Display Clamp (allows the tube extension to slide through) Clamp Range - 15mm to 40mm (Chrome, White or Black)			DC10 Fixed Length Display Clamp Clamp Range - 7mm to 45mm (White or Black)
formation for ordering Spectrum Spotlights:
S134 . 300 . RF10 . 03			When ordering Spectrum LV please use the following codes:
			1. Spotlight e.g. S134 (240V GU10 50W Max)
			2. Overall height e.g. 300 (300mm) (Measured from the face of the display to top of spotlight, not including lamp)
			3. Base Plate e.g. RF10 (Rear Fix Base Plate)
			4. Finish .03 - Chrome .05 - Brushed Chrome/Stainless Steel Effect ( .01 - White, .02 Black and .04 Brass are still available but have been reclassified as non standard finishes and from the end of October 2005 will incur a £ 35.00 surcharge per order for extra costs involved.)
			Example code for fitting shown, which is an S134 spotlight mounted on a Rear Fix Base Plate with an overall height of 300mm.