Tubelight Dual Fix LED Pro by Display Lighting Ltd
Tubelight Dual Fix LED Pro is a made to measure product that is manufactured to your exact specifications.
Up to 6 350mA Luxeon® LED Spotlights can be fixed onto the tubes at heights to suit your shelves and each spotlight adjusts through 90 degrees and rotates through 355 degrees.
TUBELIGHT Dual Fix LED Pro Shelf Supports / Fixings
Dual Fix Tubelights can be supplied with Shelf Supports (assembled at time of manufacture) positioned in between each of the fixed spotlights. The Shelf supports can be adjusted in height between the spotlights and locked in place to hold glass shelves in position. The Shelf Supports can also be used to fix Tubelights onto the edge of shelves.
Tubelight Dual Fix LV Pro Tube Extensions
TUBE DIAMETER - 9.6mm / 3/8"
Maximum Overall Length (including bases) - 2020mm
Maximum No of Spectrum LED Pro Spotlights - 6
Tubelight Dual Fix LED Pro 350mA Spotlight
S156
Single Colour Luxeon LED's
Beam Angles
W - White (1.20W)
WW - Warm White (1.20W)
R - Red (1.03W)
G - Green (1.20W)
B - Blue (1.20W)
005 - 5 Degrees
015 - 10 Degrees
025 - 25 Degrees
Tubelight Dual Fix LED Pro Bases/Fixings
RF10
FF10
Rear Fix Base Plate
Diameter - 22mm
Fixing - M10 X 50mm Thread c/w M10 Nut & Washer
(Various thread lengths available, please specify at time of order)
Front Fix Base Plate
Diameter - 30mm
Fixing - 2 concealed screws
CP10
Ceiling Plate
Diameter - 54mm
Fixing - 2 concealed screws
(Allows side cable entry and internal wiring connections)
Glass Fixer
Diameter - 20mm
Thread - M5 x 15mm
(Drill Min 6mm / Max 8mm Hole in Glass)
Ordering Tubelight Dual Fix LED Pro
Drawings can be faxed or emailed using the details below:
fax - 0044 (0) 161 929 3356
email - sales@display-lighting.com
1. Configuration
TDL2 - 2 x 350mA LED Spotlights
TDL3 - 3 x 350mA LED Spotlights
TDL4 - 4 x 350mA LED Spotlights
TDL5 - 5 x 350mA LED Spotlights
TDL6 - 6 x 350mA LED Spotlights
2. Overall height
e.g. 500 (2024mm Max)
(Measured from the face of the bottom panel to top of highest spotlight)
3. Spotlight
e.g. S156
4. LED Colour
e.g. W
5. LED Beam Angle (Degrees)
e.g. 025
6. Luminaire Finish
.03 - Chrome
.05
-
Brushed
Chrome/Stainless Steel Effect
( .01 - White, .02 Black, .04 Brass can be supplied
but have been classified as non standard finishes and will incur a setup charge to cover extra costs involved.)
7. Base Fixing
e.g. RF10 - Rear Fix Base Plate
8. Top Fixing
e.g. GF10 - Glass Fixer
Spotlight Heights
Please provide drawing or sketch showing either heights of shelves or heights of spotlights measured to highest point of spotlight.