Single Fix Tubelight LV Pro Spotlights


Tubelight Single Fix LV Pro ^{by Display Lighting Ltd}
Tubelight LV Pro - TS2.400.FF10.05 Tubelight LV Pro - Single Fix is a made to measure product that is manufactured to your exact specifications. Up to 5 spotlights can be fixed onto the tubes at heights to suit your shelves and each spotlight adjusts through 90 degrees and rotates through 355 degrees. The cables from the spotlights exit at the bottom through the centre of the fixing.

TUBELIGHT Single Fix LV Pro Shelf Supports / Fixings

		Single Fix Tubelights can be supplied with Shelf Supports (assembled at time of manufacture) positioned in between each of the fixed spotlights. The Shelf supports can be adjusted in height between the spotlights and locked in place to hold glass shelves in position. The Shelf Supports can also be used to fix Tubelights onto the edge of shelves.

Tubelight Single Fix LV Pro Tube Extensions

		TUBE DIAMETER - 9.6mm / 3/8" Maximum Overall Length (including bases) - 1560mm Maximum No of Spectrum LV Pro Spotlights - 5

Tubelight Single Fix LV Pro 12V Spotlights

S112		S111
Cap - GU4 Lamp - 12V MR8 or MR11 10W, 20W or 35W or LED		Cap - GU4 Lamp - 12V MR11 10W, 20W or LED

S122		S121
Cap - GU5.3 Lamp - 12V MR16 20W, 35W, 50W or Triple High Power LED Lamps (see below)		Cap - GU5.3 Lamp - 12V MR16 20W, 35W or Triple High Power LED Lamps (see below)

Triple High Power LED Lamps

MR16-5-LED/MKV - Warm White		MR16-5-LED/MKVII - White

Life/Hours Base Input Voltage Colour Temperatures . Beam Angle		30'000 GU5.3 12V DC (12V AC transformers will reduce life of lamp by up to half!) MR16-5-LED/MKV - Warm White 2700k - 3500k MR16-5-LED/MKVII - Cool White 7000k - 9000k 36 Degrees

MR16 Energy Saving Cost Comparison		MR16 LED Lamp Data Sheet

Tubelight Single Fix LV Pro Bases/Fixings

RF10		FF10
Rear Fix Base Plate Diameter - 22mm Fixing - M10 X 50mm Thread c/w M10 Nut & Washer (Various thread lengths available, please specify at time of order)		Front Fix Base Plate Diameter - 30mm Fixing - 2 concealed screws

CP10
Ceiling Plate Diameter - 54mm Fixing - 2 concealed screws (Allows side cable entry and internal wiring connections)

Ordering Tubelight Single Fix LV Pro

Drawings can be faxed or emailed using the details below: fax - 0044 (0) 161 929 3356 email - sales@display-lighting.com		1. Configuration TS2 - 2 x 12V Spotlights TS3 - 3 x 12V Spotlights TS4 - 4 x 12V Spotlights TS5 - 5 x 12V Spotlights 2. Overall height e.g. 500 (1560mm Max) (Measured from the face of the bottom panel to top of highest spotlight) 3. Spotlights e.g. S112 (Any of the 4 types of 12V spotlights pictured above.) 4. Finish .03 - Chrome .05 - Brushed Chrome/Stainless Steel Effect ( .01 - White, .02 Black, .04 Brass can be supplied but have been classified as non standard finishes and will incur a setup charge to cover extra costs involved.) 5. Base Fixing e.g. RF10 - Rear Fix Base Plate 6. Spotlight Heights Please provide drawing or sketch showing either heights of shelves or heights of spotlights measured to highest point of spotlight.