KIT INCLUDES:
-
1 x 1000mm Square Aluminium LED Profiles with VHB Adhesive Tape & 1.8m lead with female bullet connector
-
Screw fix clips (2 per profile)
-
1 x 12V DC mains power supply with male bullet connector
BATTERY ADD ON KIT (SOLD SEPARATELY) SEE BOTTOM OF PAGE:
-
1 x Lithium Polymer Battery Pack with Charger, Leads & Connectors.
Before adding this product to your wishlist please select the relevant buttons below:
|
Beam Angle - 60 Degrees Dimmable - No Finish - Satin Aluminium Fixing - VHB Tape or Screw Fix Height - 12mm
IP Rating - IP20 Lamp - Integral LEDs LED Colour - See options Length - 1000mm x 1 Material - Aluminium / Polycarbonate
Maximum Load - 0.8A per Metre QTY per pack - 1 Voltage - 12V DC Wattage - 9.12W per profile Width - 16mm
|
Installation/Additional Images (click to enlarge) |
1. SELECT LED COLOUR TEMPERATURE (CCT):[click to expand]
The light produced by candles is very warm (basically yellow/orange) whereas daylight at noon is very cool. The colour or warmth of white light is ranked on a scale, the Kelvin scale, the warmer the colour the lower the colour temperature. Candles being around 2000 degrees Kelvin (K) while daylight typically 5500 – 6500K, please select your choice of colour temperature from the list below:
2. LITHIUM BATTERY ADD ON KIT (SOLD SEPARATELY):[click to expand]
THE RECHARGE TIME FOR EACH BATTERY IS SHOWN BELOW:
-
DLT2541 (4aH) = 4 - 6 Hours
-
DLT2544 (8aH) = 8 - 12 Hours
-
DLT2545 (10aH) = 9 - 14 Hours
-
DLT2546 (14aH) = 10 - 16 Hours
-
DLT2548 (22aH) = 14 - 20 Hours
A 3A Fast Charger (DLTR8138) is available as an additional item for 8aH, 10aH, 14aH & 22aH lithium batteries, this will reduce the charge time by approximately half.
Due to current shipping regulations it is not viable for us to ship lithium batteries by air from the UK.
|