LEDA-IP65 9.6W/m IP65 LED Flex (3528SMD) Cut Every 50mm

Components

Please update your product by selecting your component options below.

Code

LEDA-IP65

QUANTITY:

Add To Quote

Description

Advice notes:

When installing into display furniture it is important to ensure that there is adequate ventilation and that the LED Flex is applied to an aluminium substrate or aluminium profile. Do not install into totally enclosed showcases where the ambient temperature can rise above recommended operating levels. Do not install IP rated outdoor LED Flex into enclosed aluminium profiles.

NOTE:

It is possible to use LED Flexible Strip connectors (shown at the bottom of the page) for IP20 & IP65 LED Strips however, if used on IP65 rated LED Strips the IP Rating will be diminished (unless resealed to an IP65 rating using silicone glue).

Specification

Beam Angle - 120 Degrees
Dimmable - Yes
Finish - White PCB
Fixing - 300MP VHB Tape

IP Rating - IP65
Lamp - Integrated LEDs
LED Colour - See options
Length - Multiples of 50mm

Material - 2oz PCB
Voltage - 24V DC
Wattage - 9.6W (Maximum Run length = 15m)
Width - 8mm (12.2mm)

OVERALL LED FLEX LENGTH:

Flexible Adhesive LED Flex can be manufactured and supplied cut to length and pre-wired by one of our skilled team of electricians. Please select the length required by highlighting the nearest longer dimension and then manually key in the exact dimension in the box provided:

C50 Please enter overall length in Multiples of 50mm in this box >>>> Select:

LED FLEX COLOUR TEMPERATURE (CCT):

The light produced by candles is very warm (basically yellow/orange) whereas daylight at noon is very cool. The colour or warmth of white light is ranked on a scale, the Kelvin scale, the warmer the colour the lower the colour temperature. Candles being around 2000 degrees Kelvin (K) while daylight typically 5500 – 6500K, please select your choice of colour temperature from the list below: