When installing into display furniture it is important to ensure that there is adequate ventilation and that the LED Flex is applied to an aluminium substrate or aluminium profile. Do not install into totally enclosed showcases where the ambient temperature can rise above recommended operating levels. Do not install IP rated outdoor LED Flex into enclosed aluminium profiles.
Flexible Adhesive LED Flex can be manufactured and supplied cut to length and pre-wired by one of our skilled team of electricians. Please select the length required by highlighting the nearest longer dimension and then manually key in the exact dimension in the box provided:
Single Colour LEDs (i.e. CW, NW & WW) can be cut every 50mm
Colour Adjustable LED Flex (i.e. CCT & RGBY) can be cut every 100mm
All of the LED Flex that Display Lighting supplies should be operated from a 24V DC supply. If your selection is either CCT or RBG then you will also require a controller, a list of recommended drivers and controllers can be found at the bottom of this page. Please select from an LED colour from the options below: