LEDK-IP20 14.4W/m IP20 LED Flex (5050SMD) RGB Cut Every 100mm

Components

Please update your product by selecting your component options below.

Code

LEDK-IP20

QUANTITY:

Add To Quote

Description

Advice notes:

When installing into display furniture it is important to ensure that there is adequate ventilation and that the LED Flex is applied to an aluminium substrate or aluminium profile. Do not install into totally enclosed showcases where the ambient temperature can rise above recommended operating levels.

Specification

Beam Angle - 120 Degrees
Dimmable - Yes
Finish - White PCB
Fixing - 300MP VHB Tape
Height - 2mm

IP Rating - IP20
Lamp - Integrated LEDs
LED Colour - RGB
Length - Multiples of 100mm
Material - 2oz PCB

Voltage - 24V DC
Wattage - 14.4W/m (Maximum Run length = 12m)
Width - 10mm

OVERALL LED FLEX LENGTH:

Flexible Adhesive LED Flex can be manufactured and supplied cut to length and pre-wired by one of our skilled team of electricians. Please select the length required by highlighting the nearest longer dimension and then manually key in the exact dimension in the box provided:

C100 Please enter overall length in Multiples of 100mm in this box >>>> Select:

LED FLEX COLOUR TEMPERATURE (CCT):

The light produced by candles is very warm (basically yellow/orange) whereas daylight at noon is very cool. The colour or warmth of white light is ranked on a scale, the Kelvin scale, the warmer the colour the lower the colour temperature. Candles being around 2000 degrees Kelvin (K) while daylight typically 5500 – 6500K, please select your choice of colour temperature from the list below:

RGB RGB - Red, Green, Blue