WHAT'S INCLUDED?
-
1 x 1000mm Square Aluminium LED Profile with VHB Adhesive Tape & 1.8m lead with female bullet connector
-
Screw fix clips (2 per profile)
-
1 x 12V DC mains power supply with male bullet connector
BATTERY ADD ON KIT (SOLD SEPARATELY) SEE BOTTOM OF PAGE:
-
1 x Lithium Polymer Battery Pack with Charger, Leads & Connectors
|
 Beam Angle - 90 Degrees Finish - Satin Aluminium Fixing - Screw Fix or VHB Tape Height - 19mm IP Rating - IP20
 Lamp - Integral LEDs LED Colour - * OPTIONS AVAILABLE * Length - 1000mm x 1 Material - Aluminium/Polycarbonate Maximum Load - 0.8A per Metre
 QTY per pack - 1 Voltage - 12V DC Wattage - 9.12W per profile Width - 19mm
|
1. SELECT LED COLOUR TEMPERATURE (CCT):[click to expand]
The light produced by candles is very warm (basically yellow/orange) whereas daylight at noon is very cool. The colour or warmth of white light is ranked on a scale, the Kelvin scale, the warmer the colour the lower the colour temperature. Candles being around 2000 degrees Kelvin (K) while daylight typically 5500 – 6500K, please select your choice of colour temperature from the list below.
* COLOURS SHOWN ARE REPRESENTATIVE ONLY *
2. 2.1mm DC EXTENSION LEADS:[click to expand]
2.1mm DC Extension Lead/s connect between the spotlight/s and power supply (or battery) and are available in lengths of 1.5m, 3m, 5m and 10m.
3. RECHARGEABLE LITHIUM BATTERY ADD ON KIT (SOLD SEPARATELY):[click to expand]
THE RECHARGE TIME FOR EACH BATTERY IS SHOWN BELOW:
-
DLT2541 (4aH) = 4 - 6 Hours
-
DLT2544 (8aH) = 8 - 12 Hours
-
DLT2545 (10aH) = 9 - 14 Hours
-
DLT2546 (14aH) = 10 - 16 Hours
-
DLT2548 (22aH) = 14 - 20 Hours
A 3A Fast Charger (DLTR8138) is available as an additional item for 8aH, 10aH, 14aH & 22aH lithium batteries, this will reduce the charge time by approximately half.
Due to current shipping regulations it is not viable for us to ship lithium batteries by air from the UK.
Click here to watch the unboxing of a Lithium Polymer Battery on YouTube
|
