WHAT'S INCLUDED?
1 x DLED 12VDC Gantry Luminaire. 1 x Mains Power Supply with 2.1mm Plug & Play Connections.
BATTERY ADD ON KIT (SOLD SEPARATELY) SEE BOTTOM OF PAGE:
1 x Lithium Polymer Battery Pack with Charger, Leads & Connectors.
DLED 12V Gantry Luminaires are cost effective luminaires manufactured with the same components as DPLED Gantry but incorporating 9.6W/m SMD LEDs. DLED 12V Gantry Luminaires can be installed using any of the fixing options shown in the options below and manufactured and supplied to your exact specifications in width and height.
Available with the following diffusers:
-
Clear (Full brightness)
-
Frosted (20% Opacity)
-
White (No Dots/Spots)
Lumen Output with Clear Diffuser:
-
3000K = 742lm/m
-
4000K = 957lm/m
-
5000K = 1012lm/m
-
6000K = 920lm/m
|
 Beam Angle - 60 Degrees Cut Out - ** OPTIONS AVAILABLE ** Diameter - 15mm Finish - ** OPTIONS AVAILABLE ** Fixing - ** OPTIONS AVAILABLE **
 Height - <1000mm IP Rating - IP20 Lamp - Non User Replaceable LEDs LED Colour - ** OPTIONS AVAILABLE ** Material - Aluminium/Brass
 QTY per pack - 1 Voltage - 12VDC Wattage - 9.6W/m Width - <2500mm
|
1. ENTER GANTRY WIDTH:[click to expand]
Gantry style profiles are manufactured and supplied to your exact specification, please enter the exact dimension "between fixing centres" in the box shown below.
PLEASE NOTE: DLED & DPLED Gantry Luminaires over 1500mm width will be manufactured and supplied with a central support to avoid the profile from sagging.
2. ENTER GANTRY HEIGHT:[click to expand]
Enter the overall visible height in the drop down box below:
3. SELECT COLOUR TEMPERATURE (CCT):[click to expand]
The light produced by candles is very warm (basically yellow/orange) whereas daylight at noon is very cool. The colour or warmth of white light is ranked on a scale, the Kelvin scale, the warmer the colour the lower the colour temperature. Candles being around 2000 degrees Kelvin (K) while daylight typically 5500 – 6500K, please select your choice of colour temperature from the list below.
* COLOURS SHOWN ARE REPRESENTATIVE ONLY *
4. SELECT DIFFUSER:[click to expand]
To make your product specification please make a selection from the component list provided:
5. SELECT FIXING:[click to expand]
To make your product specification please make a selection from the component list provided:
6. SELECT FINISH:[click to expand]
To make your product specification please make a selection from the component list provided:
COLOURS SHOWN ARE EXAMPLES ONLY AND MAY NOT BE AN EXACT MATCH FOR FINISHED PRODUCTS. TO VIEW RAL COLOUR CHART CLICK HERE
* COLOURS SHOWN ARE REPRESENTATIVE ONLY *
7. 2.1mm DC EXTENSION LEADS:[click to expand]
2.1mm DC Extension Lead/s connect between the spotlight/s and power supply (or battery) and are available in lengths of 1.5m, 3m, 5m and 10m.
8. RECHARGEABLE LITHIUM BATTERY OPTIONS:[click to expand]
THE RECHARGE TIME FOR EACH BATTERY IS SHOWN BELOW:
-
DLT2541 (4aH) = 4 - 6 Hours
-
DLT2544 (8aH) = 8 - 12 Hours
-
DLT2545 (10aH) = 9 - 14 Hours
-
DLT2546 (14aH) = 10 - 16 Hours
-
DLT2548 (22aH) = 14 - 20 Hours
NOTES:
-
A 3A Fast Charger (DLTR8138) is available as an additional item for 8aH, 10aH, 14aH & 22aH lithium batteries, this will reduce the charge time by approximately half.
-
It is not viable for us to ship Lithium Batteries overseas by air from the UK due to current shipping legislation therefore they are only available to UK companies.
How to calculate approximate battery life based on operating 1 x 1000mm DLED 12V Gantry from Lithium Batteries:
-
W / V = A i.e. 9.6W (Watts per Metre) divided by 12 (Volts) = 0.8 (Amps)
-
Battery Capacity aH (i.e 4, 8, 10 ,14 ,22) divided by 0.8 = Approximate Life Expectancy (Hours)
4aH = 5 Hours | 8aH = 10 Hours | 10aH = 12.5 Hours | 14aH - 17.5 Hours | 22aH = 27.5 Hours
Click here to watch the unboxing of a Lithium Polymer Battery on YouTube
|
