Spotlight Dimensions:
Head Diameter - 25mm
Projection from Profile (at 90 Degrees) - 50mm
Maximum Number of Spotlights = 12
Profile Dimensions (half round):
Diameter - 21.5mm
Top & Bottom Fixing Dimensions:
Diameter - 37.5mm
Height - 5mm
Fixing - 3 Screws (not supplied)
Specify your requirements below and the order code will be generated automatically :
|
 Adjustment - 90 Degrees Beam Angle - ** OPTIONS AVAILABLE ** Cut Out - 7mm Hole for Cable Exit Dimmable - ** OPTIONS AVAILABLE ** Finish - ** OPTIONS AVAILABLE **
 Fixing - ** OPTIONS AVAILABLE ** Height - < 2500mm (including fixings) Lamp - Integrated non user replaceable LED/s LED Colour - ** OPTIONS AVAILABLE ** Material - Aluminium / Brass
 QTY per pack - 1 Rotation - 350 Degrees Voltage - 350mA Constant Current Wattage - 1W per Spotlight
|
1. SD / SDL SPOTLIGHTS:[click to expand]
SD & SDL profiles are manufactured and supplied to your specification with up to 12 x LED Spotlights mounted at fixed heights, please enter the number of spotlights required in the box provided here.
2. SPECIFY OVERALL SD / SDL LENGTH:[click to expand]
SD & SDL profiles are manufactured and supplied to your exact height/length, please enter the exact overall dimension (including fixings) in the box provided.
Allow a minimum height of 100mm per spotlight i.e. the minimum height for an SDL Multiway profile with 10 spotlights is 1000mm.
3. SELECT COLOUR TEMPERATURE (CCT):[click to expand]
The light produced by candles is very warm (basically yellow/orange) whereas daylight at noon is very cool. The colour or warmth of white light is ranked on a scale, the Kelvin scale, the warmer the colour the lower the colour temperature. Candles being around 2000 degrees Kelvin (K) while daylight typically 5500 – 6500K, please select your choice of colour temperature from the list below.
* COLOURS SHOWN ARE REPRESENTATIVE ONLY *
4. SELECT FIXING:[click to expand]
To make your product specification please make a selection from the component list provided:
5. SELECT BEAM ANGLE REQUIRED:[click to expand]
When selecting beam angle, it’s important to note how many different fixtures you have to work with, as well as the distance between these light sources. Think about whether you want overlapping beams to create general lighting and ambience, or whether you’d prefer isolated pockets of light. This is especially important if you are working with overhead recessed lighting.
6. SELECT FINISH:[click to expand]
To make your product specification please make a selection from the component list provided:
COLOURS SHOWN ARE EXAMPLES ONLY AND MAY NOT BE AN EXACT MATCH FOR FINISHED PRODUCTS. TO VIEW RAL COLOUR CHART CLICK HERE
* COLOURS SHOWN ARE REPRESENTATIVE ONLY *
7. SELECT LED DRIVER / DIMMING OPTION:[click to expand]
Select from the Plug & Play options below, if your requirement is not shown in the list please add a note to your quote request or contact one of our sales team on 0044 (0) 161 207 3355 or email sales@display-lighting.com
Casambi Smartphone App required for Bluetooth control (available on IOS & Android)
|
