The S158 luminaire is supplied complete with a stirrup bracket that can be screwed or riveted to most types of surfaces. It is ideal for screwing to the uprights in showcases and the cable can be fed up or down to the driver. This fitting stands only 50mm high and is perfect for applications that require miniature lighting.
S158 LED Spotlight
-
Requires 350mA LED Driver (see bottom of page)
-
Watts - 1W
-
Fixing - Screw Fix Sturrup Bracket
-
LED non user replaceable (only replaceable by manufacturer or appointed service agent).
Spectrum LED Lumen Output @350mA:
-
3000K - 105lm (CRI90>)
-
4000K - 144lm (CRI80>)
-
5000K - 150lm (CRI80>)
|
 Adjustment - 90 Degrees Beam Angle - ** OPTIONS AVAILABLE ** Diameter - 25mm Dimmable - ** OPTIONS AVAILABLE ** Finish - ** OPTIONS AVAILABLE **
 Fixing - Screw Fix Height - 89mm (Including Bracket) Lamp - Non user replaceable LED LED Colour - ** OPTIONS AVAILABLE ** Length - 50mm (Excluding Bracket)
 Material - Brass QTY per pack - 1 Rotation - 350 Degrees Wattage - 1W @ 350mA | 1.5W @ 500mA
|
1. SELECT COLOUR TEMPERATURE (CCT):[click to expand]
The light produced by candles is very warm (basically yellow/orange) whereas daylight at noon is very cool. The colour or warmth of white light is ranked on a scale, the Kelvin scale, the warmer the colour the lower the colour temperature. Candles being around 2000 degrees Kelvin (K) while daylight typically 5500 – 6500K, please select your choice of colour temperature from the list below.
* COLOURS SHOWN ARE REPRESENTATIVE ONLY *
2. SELECT BEAM ANGLE REQUIRED:[click to expand]
When selecting beam angle, it’s important to note how many different fixtures you have to work with, as well as the distance between these light sources. Think about whether you want overlapping beams to create general lighting and ambience, or whether you’d prefer isolated pockets of light. This is especially important if you are working with overhead recessed lighting.
3. SELECT FINISH:[click to expand]
To make your product specification please make a selection from the component list provided:
COLOURS SHOWN ARE EXAMPLES ONLY AND MAY NOT BE AN EXACT MATCH FOR FINISHED PRODUCTS. TO VIEW RAL COLOUR CHART CLICK HERE
* COLOURS SHOWN ARE REPRESENTATIVE ONLY *
4. NUMBER OF LUMINAIRES REQUIRED PER SET * I.E. WIRED TO ONE POWER SUPPLY *[click to expand]
Please select how many fittings you would like to operate per set (from a single power supply) with Plug & Play Connections. If your requirement is not shown in the list please add a note to your quote request or contact one of our sales team on 0044 (0) 161 207 3355 or email sales@display-lighting.com
5. SELECT LED DRIVER / DIMMING OPTION:[click to expand]
Select from the Plug & Play options below, if your requirement is not shown in the list please add a note to your quote request or contact one of our sales team on 0044 (0) 161 207 3355 or email sales@display-lighting.com
Casambi Smartphone App required for Bluetooth control (available on IOS & Android)
|
