S52 luminaire is a fixed angle surface mounted spotlight perfect for replacing puck lights in showcase and shelving displays.
S52 LED Spotlight:
-
Requires 350mA Constant Current LED Driver (see bottom of page)
-
Watts - 1W
-
Fixing - Screw Fix
-
LED non user replaceable (only replaceable by manufacturer or appointed service agent).
Spectrum LED Lumen Output @350mA:
-
3000K - 105lm (CRI90>)
-
4000K - 144lm (CRI80>)
-
5000K - 150lm (CRI80>)
|
 Beam Angle - ** OPTIONS AVAILABLE ** Cap/Lampholder - Non user replaceable LED Cut Out - 6 - 7mm Diameter - 42mm Dimmable - ** OPTIONS AVAILABLE **
 Finish - ** OPTIONS AVAILABLE ** Fixing - Screw Fix Height - 34mm IP Rating - IP20 LED Colour - ** OPTIONS AVAILABLE **
 Material - Aluminium QTY per pack - 1 Wattage - 1W @ 350mA
|
1. SELECT COLOUR TEMPERATURE (CCT):[click to expand]
The light produced by candles is very warm (basically yellow/orange) whereas daylight at noon is very cool. The colour or warmth of white light is ranked on a scale, the Kelvin scale, the warmer the colour the lower the colour temperature. Candles being around 2000 degrees Kelvin (K) while daylight typically 5500 – 6500K, please select your choice of colour temperature from the list below.
* COLOURS SHOWN ARE REPRESENTATIVE ONLY *
2. SELECT BEAM ANGLE REQUIRED:[click to expand]
When selecting beam angle, it’s important to note how many different fixtures you have to work with, as well as the distance between these light sources. Think about whether you want overlapping beams to create general lighting and ambience, or whether you’d prefer isolated pockets of light. This is especially important if you are working with overhead recessed lighting.
3. SELECT FINISH:[click to expand]
To make your product specification please make a selection from the component list provided:
COLOURS SHOWN ARE EXAMPLES ONLY AND MAY NOT BE AN EXACT MATCH FOR FINISHED PRODUCTS. TO VIEW RAL COLOUR CHART CLICK HERE
* COLOURS SHOWN ARE REPRESENTATIVE ONLY *
4. NUMBER OF LUMINAIRES REQUIRED PER SET * I.E. WIRED TO ONE POWER SUPPLY *[click to expand]
Please select how many fittings you would like to operate per set (from a single power supply) with Plug & Play Connections. If your requirement is not shown in the list please add a note to your quote request or contact one of our sales team on 0044 (0) 161 207 3355 or email sales@display-lighting.com
5. SELECT LED DRIVER / DIMMING OPTION:[click to expand]
Select from the Plug & Play options below, if your requirement is not shown in the list please add a note to your quote request or contact one of our sales team on 0044 (0) 161 207 3355 or email sales@display-lighting.com
Casambi Smartphone App required for Bluetooth control (available on IOS & Android)
|
