The CSVL Tubelight Multi is manufactured with two spotlights mounted at 90 degrees to each other so that it can be mounted into the corners of counters and showcases, each of the spotlights are independently adjustable.
This luminaire is an ideal choice when illuminating two different displays from a single mounted fitting. The CSVL has been a popular fitting for installation into showcases as both spotlights are mounted at the same height therefore creating the same level of brightness and the 90 degree arrangement is perfect for mounting into the corner of showcases.
Spectrum LED Lumen Output:
-
3000K - 105lm (CRI90>)
-
4000K - 144lm (CRI90>)
-
5000K - 150lm (CRI90>)
|
 Adjustment - 90 Degrees Beam Angle - * OPTIONS AVAILABLE * Cut Out - See fixing options Dimmable - Yes Finish - * OPTIONS AVAILABLE * Fixing - * OPTIONS AVAILABLE *
 Height - * OPTIONS AVAILABLE * IP Rating - IP20 Lamp - Integrated Non Replaceable LED LED Colour - * OPTIONS AVAILABLE * Material - Brass QTY per pack - 1
 Recessed Depth - * OPTIONS AVAILABLE * Rotation - 350 Degrees Voltage - 350mA Constant Current Wattage - 2 x 1W
|
1. SPOTLIGHT HEIGHT:[click to expand]
Manufactured to your exact specified height, enter the visible overall height required in the box shown below:
2. SELECT COLOUR TEMPERATURE (CCT):[click to expand]
The light produced by candles is very warm (basically yellow/orange) whereas daylight at noon is very cool. The colour or warmth of white light is ranked on a scale, the Kelvin scale, the warmer the colour the lower the colour temperature. Candles being around 2000 degrees Kelvin (K) while daylight typically 5500 – 6500K, please select your choice of colour temperature from the list below:
3. SELECT BEAM ANGLE REQUIRED:[click to expand]
When selecting beam angle, it’s important to note how many different fixtures you have to work with, as well as the distance between these light sources. Think about whether you want overlapping beams to create general lighting and ambience, or whether you’d prefer isolated pockets of light. This is especially important if you are working with overhead recessed lighting.
4. SELECT FINISH:[click to expand]
To make your product specification please make a selection from the component list provided:
COLOURS SHOWN ARE EXAMPLES ONLY AND MAY NOT BE AN EXACT MATCH FOR FINISHED PRODUCTS. TO VIEW RAL COLOUR CHART CLICK HERE
5. BOTTOM FIXING:[click to expand]
To make your product specification please make a selection from the component list provided:
Tubelight can be fixed at the base using any of the fixings shown below.
6. NUMBER OF LUMINAIRES REQUIRED PER SET *WIRED TO ONE POWER SUPPLY*[click to expand]
Please select how many fittings you would like to operate per set (from a single power supply) with Plug & Play Connections. If your requirement is not shown in the list please add a note to your quote request or contact one of our sales team on 0044 (0) 161 207 3355 or email sales@display-lighting.com
7. SELECT LED DRIVER / DIMMING OPTION:[click to expand]
Select from the Plug & Play options below, if your requirement is not shown in the list please add a note to your quote request or contact one of our sales team on 0044 (0) 161 207 3355 or email sales@display-lighting.com
Casambi Smartphone App required for Bluetooth control (available on IOS & Android)
|
