Tubelight Dual Fix LV Pro is a made to measure showcase lighting system that can be installed into tall counter displays with shelving. Display Lighting can manufacture Dual Fix Tubelights with up to five spotlights set on the tube at fixed heights to suit the display unit. The spotlights can be operated with LED lamps. Dual Fix Tubelight can also be used to feed wiring from the top of a display case to the bottom or vice versa without spotlights.
Dual Fix Tubelight can also be manufactured and supplied to support glass shelves, these can be either shelf holders or shelf pegs, please see options below.
To make ordering as simple and straight forward as possible, our team have included a list of recommended lamps for use with the luminaires in this range, these can be found at the bottom of the page.
BUILD A TUBELIGHT LV TO YOUR EXACT SPECIFICATIONS BY SELECTING FROM THE OPTIONS BELOW.
   
|
 Adjustment - 90 Degrees Beam Angle - ** OPTIONS AVAILABLE ** Cap/Lampholder - GU4 or GU5.3 Finish - ** OPTIONS AVAILABLE ** Fixing - ** OPTIONS AVAILABLE **
 Height - ** OPTIONS AVAILABLE ** IP Rating - IP20 Lamp - MR11 or MR16 LED Colour - ** OPTIONS AVAILABLE ** Material - Brass
 QTY per pack - 1 Rotation - 350 Degrees Voltage - 12V AC/DC Wattage - ** OPTIONS AVAILABLE **
|
Installation/Additional Images (click to enlarge) |
1. TS/TD TUBELIGHT LV SPOTLIGHT CONFIGURATION:[click to expand]
To make your product specification please make a selection from the component list below:
2. SPOTLIGHT HEIGHT:[click to expand]
Manufactured to your exact specified height, enter the visible overall height required in the box shown below:
3. SHELF SUPPORTS:[click to expand]
To make your product specification please make a selection from the component list provided:
Please also specify the height, measured from the bottom of the case to the top of each shelf support, by entering in to the notes at the bottom of your quote request.
4. SELECT FINISH:[click to expand]
To make your product specification please make a selection from the component list provided:
COLOURS SHOWN ARE EXAMPLES ONLY AND MAY NOT BE AN EXACT MATCH FOR FINISHED PRODUCTS. TO VIEW RAL COLOUR CHART CLICK HERE
* COLOURS SHOWN ARE REPRESENTATIVE ONLY *
5. TOP FIXING:[click to expand]
To make your product specification please make a selection from the component list provided:
Tubelight can be fixed at the top to glass, wood or MDF using the fixings shown in the list below.
6. BOTTOM FIXING:[click to expand]
To make your product specification please make a selection from the component list provided:
Tubelight can be fixed at the base using any of the fixings shown below.
7. LED LAMP OPTIONS:[click to expand]
The light produced by candles is very warm (basically yellow/orange) whereas daylight at noon is very cool. The colour or warmth of white light is ranked on a scale, the Kelvin scale, the warmer the colour the lower the colour temperature. Candles being around 2000 degrees Kelvin (K) while daylight typically 5500 – 6500K, please select your choice of colour temperature from the list below:
* COLOURS SHOWN ARE REPRESENTATIVE ONLY *
8. NUMBER OF LUMINAIRES REQUIRED PER SET * I.E. WIRED TO ONE POWER SUPPLY *[click to expand]
Please select how many fittings you would like to operate per set (from a single power supply) with Plug & Play Connections. If your requirement is not shown in the list please add a note to your quote request or contact one of our sales team on 0044 (0) 161 207 3355 or email sales@display-lighting.com
9. SELECT LED DRIVER / DIMMING OPTION:[click to expand]
Select from the Plug & Play options below, if your requirement is not shown in the list please add a note to your quote request or contact one of our sales team on 0044 (0) 161 207 3355 or email sales@display-lighting.com
Casambi Smartphone App required for Bluetooth control (available on IOS & Android)
|
