DPJLED gantry lighting system is designed and manufactured by Display Lighting in the UK. The team at Display Lighting designed DPJLED Gantry Luminiares as an unobtrusive lighting solution for illuminating showcases and counters. They can be fixed using any of the options below and supplied to your exact specifications in width and height. The standard finish is bright silver anodised but Display Lighting can manufacture and supply this bespoke product in any powder coated finish shown in the options.
Available with the following diffusers:
-
Clear (Full brightness)
-
Opal (20% Opacity)
-
White (No Dots/Spots)
Lumen Output with Clear Diffuser:
-
3000K = 118lm/W (1770lm/m)
-
4000K = 129lm/W (1935lm/m)
-
5700K = 140lm/W (2100lm/m)
-
3000K/5700K = 129lm/W (1935lm/m)
DPJLED premium profile luminaires incorporate Luxeon LEDs for ultimate performance, smooth uniform distribution and reliability. Supplied in four colour temperatures as standard, 3000K, 4000K, 5700K and a 3000K/5700K mixed strip.
Rectangular package design of the Luxeon LEDs increases uniformity and reduces spottiness. Superior heat dissipation of the Luxeon LEDs enables increased thermal management.
|
 Beam Angle - Linear 60 Degrees | Spotlights 10, 25, 40 or 60... Cut Out - See fixings Diameter - 15mm Dimmable - ** OPTIONS AVAILABLE ** Finish - ** OPTIONS AVAILABLE **
 Fixing - ** OPTIONS AVAILABLE ** Height - < 1000mm IP Rating - IP20 Lamp - Non User Replaceable LEDs LED Colour - ** OPTIONS AVAILABLE **
 Material - Aluminium/Brass QTY per pack - 1 Voltage - 24V DC Wattage - 15W/m + 1W Spotlights Width - < 2500mm
|
1. ENTER GANTRY WIDTH:[click to expand]
Gantry style profiles are manufactured and supplied to your exact specification, please enter the exact dimension "between fixing centres" in the box shown below.
PLEASE NOTE: DLED & DPLED Gantry Luminaires over 1500mm width will be manufactured and supplied with a central support to avoid the profile from sagging.
2. ENTER GANTRY HEIGHT:[click to expand]
Enter the overall visible height in the drop down box below:
3. SELECT DIFFUSER:[click to expand]
To make your product specification please make a selection from the component list provided:
4. SELECT FIXING:[click to expand]
To make your product specification please make a selection from the component list provided:
5. SELECT LED COLOUR TEMPERATURE (CCT):[click to expand]
The light produced by candles is very warm (basically yellow/orange) whereas daylight at noon is very cool. The colour or warmth of white light is ranked on a scale, the Kelvin scale, the warmer the colour the lower the colour temperature. Candles being around 2000 degrees Kelvin (K) while daylight typically 5500 – 6500K, please select your choice of colour temperature from the list below.
* COLOURS SHOWN ARE REPRESENTATIVE ONLY *
6. DPJED LED Spotlights[click to expand]
Enter total number of 1W LED spotlights required on vertical uprights.
-
If one spotlight is required per upright select 2xS152
-
If two spotlights are required per upright enter 4xS152
-
If three spotlights are required per upright enter 6xS152
7. SELECT BEAM ANGLE REQUIRED:[click to expand]
When selecting beam angle, it’s important to note how many different fixtures you have to work with, as well as the distance between these light sources. Think about whether you want overlapping beams to create general lighting and ambience, or whether you’d prefer isolated pockets of light. This is especially important if you are working with overhead recessed lighting.
8. SELECT FINISH:[click to expand]
To make your product specification please make a selection from the component list provided:
COLOURS SHOWN ARE EXAMPLES ONLY AND MAY NOT BE AN EXACT MATCH FOR FINISHED PRODUCTS. TO VIEW RAL COLOUR CHART CLICK HERE
* COLOURS SHOWN ARE REPRESENTATIVE ONLY *
9. SELECT LED DRIVER / DIMMING OPTION:[click to expand]
Select from the Plug & Play options below, if your requirement is not shown in the list please add a note to your quote request or contact one of our sales team on 0044 (0) 161 207 3355 or email sales@display-lighting.com
Casambi Smartphone App required for Bluetooth control (available on IOS & Android)
|
