The team at Display Lighting designed HLED Linear LED Backlight Luminiares as a high brightness, low heat lighting solution for backlighting graphics and logos in display furniture. HLED can be fixed using using VHB tape or by screw fixing using predrilled holes and is manufactured and supplied to your exact length specifications.
Manufactured & supplied with any of the standard LEDs shown below:
4.8W/m (394lm-480lm/m):
9.6W/m (787lm-883lm/m):
19.2W/m (1340-1550lm/m):
9.6W/m (360lm-410lm/m):
-
Tuneable White (2700K-6500K)
19.2W/m (720lm-820lm/m):
-
Tuneable White (2700K-6500K)
14.4W/m (506lm/m):
|
 Beam Angle - 120 Degrees Cap/Lampholder - Integrated Non replaceable LEDs Cut Out - Surface Mount Dimmable - ** OPTIONS AVAILABLE ** Finish - Satin Silver Fixing - VHB Tape or Screw Fix
 Height - 4mm IP Rating - IP20 Lamp - Integrated Non replaceable LEDs LED Colour - ** OPTIONS AVAILABLE ** Length - ** OPTIONS AVAILABLE ** Material - Aluminium
 QTY per pack - 1 Voltage - 24VDC Wattage - ** OPTIONS AVAILABLE ** Width - 13.5mm
|
1. ENTER OVERALL PROFILE LENGTH:[click to expand]
To make your product specification please make a selection from the component list below:
2. SELECT PROFILE FIXING METHOD:[click to expand]
To make your product specification please make a selection from the component list provided:
3. LED FLEX COLOUR TEMPERATURE (CCT):[click to expand]
The light produced by candles is very warm (basically yellow/orange) whereas daylight at noon is very cool. The colour or warmth of white light is ranked on a scale, the Kelvin scale, the warmer the colour the lower the colour temperature. Candles being around 2000 degrees Kelvin (K) while daylight typically 5500 – 6500K, please select your choice of colour temperature from the list below:
NOTE: The pictures shown are representative only and may not be a true likeness.
4. SELECT FINISH:[click to expand]
To make your product specification please make a selection from the component list provided:
COLOURS SHOWN ARE EXAMPLES ONLY AND MAY NOT BE AN EXACT MATCH FOR FINISHED PRODUCTS. TO VIEW RAL COLOUR CHART CLICK HERE
* COLOURS SHOWN ARE REPRESENTATIVE ONLY *
5. NUMBER OF LUMINAIRES REQUIRED PER SET * I.E. WIRED TO ONE POWER SUPPLY *[click to expand]
Please select how many fittings you would like to operate per set (from a single power supply) with Plug & Play Connections. If your requirement is not shown in the list please add a note to your quote request or contact one of our sales team on 0044 (0) 161 207 3355 or email sales@display-lighting.com
6. SELECT LED DRIVER / DIMMING OPTION:[click to expand]
Select from the Plug & Play options below, if your requirement is not shown in the list please add a note to your quote request or contact one of our sales team on 0044 (0) 161 207 3355 or email sales@display-lighting.com
Casambi Smartphone App required for Bluetooth control (available on IOS & Android)
|
