Made to Measure LED Litesheet

1. LITESHEET WIDTH DIMENSION:

[click to expand]

To make your product specification please make a selection from the component list provided:

WIDTH LITESHEET ENTER WIDTH HERE (100mm - 3000mm) >>>> Select:

2. LITESHEET HEIGHT DIMENSION:

[click to expand]

To make your product specification please make a selection from the component list provided:

HEIGHT LITESHEET ENTER HEIGHT HERE (100mm - 1500mm) >>>> Select:

3. LED LITESHEET DIFFUSER:

[click to expand]

We recommend only using Litesheet without diffuser when it is being used to backlight graphics or splashbacks. The opal acrylic diffuser offers high light diffusion level and light transmission.

	NO DIFFUSER	NO DIFFUSER
	YES	3mm OPAL ACRYLIC DIFFUSER REQUIRED (Thickness = 3mm)

4. LITESHEET WIRE EXIT POSITION:

[click to expand]

To make your product specification please make a selection from the component list provided:

	1	Top Left Hand Corner - Long Side
	2	Top Left Hand Corner - Short Side
	3	Bottom Left Hand Corner - Short Side
	4	Bottom Left Hand Corner - Long Side
	5	Bottom Right Hand Corner - Long Side
	6	Bottom Right Hand Corner - Short Side
	7	Top Right Hand Corner - Short Side
	8	Top Right Hand Corner - Long Side

5. LITESHEET WIRE EXIT:

[click to expand]

To make your product specification please make a selection from the component list provided:

	BACK	Cable exit from back of LITESHEET
	EDGE	Cable exit from edge of LITESHEET
	FRONT	Cable exit from front of LITESHEET

6. SELECT COLOUR TEMPERATURE:

[click to expand]

The light produced by candles is very warm (basically yellow/orange) whereas daylight at noon is very cool. The colour or warmth of white light is ranked on a scale, the Kelvin scale, the warmer the colour the lower the colour temperature. Candles being around 2000 degrees Kelvin (K) while daylight typically 5500 – 6500K, please select your choice of colour temperature from the list below.

	27	2700K
	30	3000K
	41	4100K
	53	5300K
	65	6500K

7. SELECT LED DRIVER / DIMMING OPTION:

[click to expand]

Select from the Plug & Play options below, if your requirement is not shown in the list please add a note to your quote request or contact one of our sales team on 0044 (0) 161 207 3355 or email sales@display-lighting.com

Casambi Smartphone App required for Bluetooth control (available on IOS & Android)

	P&P	Plug & Play \| Standard On/Off Driver with 2m Mains Lead & UK Plug
	P&P/BT	Plug & Play \| Bluetooth Controllable Driver (no mains lead)
	P&P/DA	Plug & Play \| 1-10V Dimmable Driver (no mains lead)
	P&P/DAP	Plug & Play \| 1-10V Dimmable Driver with Manual Pot Dimmer, 2m Mains Lead & UK Plug
	P&P/DD	Plug & Play \| DALI Dimmable Driver (no mains lead)
	P&P/DMX	Plug & Play \| 12-48V Driver & DMX512 Decoder with 2m Mains Lead & UK Plug
	P&P/DT	Plug & Play \| TRIAC (Mains) Dimmable Driver (no mains lead)
	P&P/OO	Plug & Play \| Standard On/Off Driver (no mains lead)
	X	Driver or Dimmer not required (not recommended)

Description

Specification

1. LITESHEET WIDTH DIMENSION:

2. LITESHEET HEIGHT DIMENSION:

3. LED LITESHEET DIFFUSER:

4. LITESHEET WIRE EXIT POSITION:

5. LITESHEET WIRE EXIT:

6. SELECT COLOUR TEMPERATURE:

7. SELECT LED DRIVER / DIMMING OPTION:

Components

Code

QUANTITY:

I have checked the components listed above are the correct specification for this quote

Email Address *

Password *

Quote Reference *

Email Address *

Title	Forename *	Surname *