LPS Light Panels are a very cost effective, value for money back lighting solution for headers, logo's, signage and graphics when compared to installing LiteSheet.
Display Lighting manufacture and supply LPS Light Panels in very short lead times thanks to our experienced manufacturing team here in our workshops in Cheshire, UK.
LPS Light Panels are manufactured and supplied with 9.6W per metre LED strips.
LPS Light Panels can be manufactured in sheet sizes up to 3050mm x 1500mm and with single colour, mixed colour or RGB LEDs. The LEDs are then laid out on to a white 3mm composite aluminium panel to give an even light distribution to suit the distance between the LEDs and the illuminated surface.
Advantages of installing Display Lighting LPS LED Light Panels into your displays:
-
Evenly Distributed Light: standard spacing 150mm.
-
Dimmable
-
UK manufacture: provides short lead times
-
Low maintenance: components made to last
-
Made to measure: with customised sizes and shapes
-
Colour choice: Kelvin temperature
-
Ease of Installation: pre drilled holes in each corner
-
Ease of wiring: simple plug and play connectors
-
LEDs installed: user friendly design
|
 Beam Angle - 120 Degrees Cap/Lampholder - Inetgrated LED Flexible PCB Dimmable - Yes Finish - White Fixing - Screw Fix
 Height - 5mm IP Rating - IP20 LED Colour - See options  Length - <3000mm Material - Composite Aluminium
 QTY per pack - 1 Voltage - 24V DC Wattage - 9.6W per Metre Width - <1500mm
|
1. LIGHT PANEL HEIGHT:[click to expand]
To make your product specification please make a selection from the component list provided:
2. LIGHT PANEL WIDTH:[click to expand]
To make your product specification please make a selection from the component list provided:
3. SELECT COLOUR TEMPERATURE:[click to expand]
The light produced by candles is very warm (basically yellow/orange) whereas daylight at noon is very cool. The colour or warmth of white light is ranked on a scale, the Kelvin scale, the warmer the colour the lower the colour temperature. Candles being around 2000 degrees Kelvin (K) while daylight typically 5500 – 6500K, please select your choice of colour temperature from the list below.
* COLOURS SHOWN ARE REPRESENTATIVE ONLY *
4. SELECT LED DRIVER / DIMMING OPTION:[click to expand]
Select from the Plug & Play options below, if your requirement is not shown in the list please add a note to your quote request or contact one of our sales team on 0044 (0) 161 207 3355 or email sales@display-lighting.com
Casambi Smartphone App required for Bluetooth control (available on IOS & Android)
|
