VPLED Premium Corner Linear Profiles (15W/m CRI90>) * Various CCT's Available * MADE TO MEASURE 📏 *

1. ENTER OVERALL PROFILE LENGTH:

[click to expand]

To make your product specification please make a selection from the component list below:

LENGTH VLED/VPLED OVERALL LENGTH (mm) 👉 Select:

2. SELECT DIFFUSER:

[click to expand]

To make your product specification please make a selection from the component list provided:

W White Diffuser (No Dots) 50% Opacity

3. SELECT PROFILE FIXING METHOD:

[click to expand]

To make your product specification please make a selection from the component list provided:

	DL-AL11/FB	VLED & VPLED Metal Screw Fix Clips - SPECIFY QTY REQUIRED HERE (2 per Metre Minimum) >>>>		Select:
	DL220000	Hi-Bond Transparent Double Sided Polyester Tape (Red Polypropylene Liner) Pre-Applied

4. SELECT LED COLOUR TEMPERATURE (CCT):

[click to expand]

The light produced by candles is very warm (basically yellow/orange) whereas daylight at noon is very cool. The colour or warmth of white light is ranked on a scale, the Kelvin scale, the warmer the colour the lower the colour temperature. Candles being around 2000 degrees Kelvin (K) while daylight typically 5500 – 6500K, please select your choice of colour temperature from the list below.

* COLOURS SHOWN ARE REPRESENTATIVE ONLY *

	CN	3000K/5700K Mix (CRI90>) use clear diffuser for full effect
	CW	5700K (CRI90>)
	NW	4000K (CRI90>)
	WW	3000K (CRI90>)

5. SELECT FINISH:

[click to expand]

To make your product specification please make a selection from the component list provided:

COLOURS SHOWN ARE EXAMPLES ONLY AND MAY NOT BE AN EXACT MATCH FOR FINISHED PRODUCTS. TO VIEW RAL COLOUR CHART CLICK HERE

* COLOURS SHOWN ARE REPRESENTATIVE ONLY *

01	White (RAL9016 Traffic White)
02	Black (RAL9005 Jet Black)
12	Anodised Bright Silver/Chrome
13	Anodised Gold/Brass
17	Anodised Satin Silver
RAL	RAL Reference PLEASE SPECIFY HERE 👉	Select:

6. NUMBER OF LUMINAIRES REQUIRED PER SET * I.E. WIRED TO ONE POWER SUPPLY *

[click to expand]

Please select how many fittings you would like to operate per set (from a single power supply) with Plug & Play Connections. If your requirement is not shown in the list please add a note to your quote request or contact one of our sales team on 0044 (0) 161 207 3355 or email sales@display-lighting.com

	SET/S OF 1	JST-RCY Parallel Connection
	SET/S OF 2	PSU-10P - Parallel Connections
	SET/S OF 3	PSU-10P - Parallel Connections
	SET/S OF 4	PSU-10P - Parallel Connections

7. SELECT LED DRIVER / DIMMING OPTION:

[click to expand]

Select from the Plug & Play options below, if your requirement is not shown in the list please add a note to your quote request or contact one of our sales team on 0044 (0) 161 207 3355 or email sales@display-lighting.com

Casambi Smartphone App required for Bluetooth control (available on IOS & Android)

	P&P	Plug & Play \| Standard On/Off Driver with 2m Mains Lead & UK Plug
	P&P/BT	Plug & Play \| Bluetooth Controllable Driver (no mains lead)
	P&P/DA	Plug & Play \| 1-10V Dimmable Driver (no mains lead)
	P&P/DAP	Plug & Play \| 1-10V Dimmable Driver with Manual Pot Dimmer, 2m Mains Lead & UK Plug
	P&P/DD	Plug & Play \| DALI Dimmable Driver (no mains lead)
	P&P/DT	Plug & Play \| TRIAC (Mains) Dimmable Driver (no mains lead)
	P&P/OO	Plug & Play \| Standard On/Off LED Driver (no mains lead)

VPLED Premium Corner Linear Profiles (15W/m CRI90>) * Various CCT's Available * MADE TO MEASURE 📏 *

Description

Specification

1. ENTER OVERALL PROFILE LENGTH:

2. SELECT DIFFUSER:

3. SELECT PROFILE FIXING METHOD:

4. SELECT LED COLOUR TEMPERATURE (CCT):

5. SELECT FINISH:

6. NUMBER OF LUMINAIRES REQUIRED PER SET * I.E. WIRED TO ONE POWER SUPPLY *

7. SELECT LED DRIVER / DIMMING OPTION:

Components

Code

QUANTITY:

I have checked the components listed above are the correct specification for this quote

Email Address *

Password *

Quote Reference *

Email Address *

Title	Forename *	Surname *