MagTrack pre-wired Plug & Play Kits comprise of the following components:
-
1 x 1.5m Track (Can be cut to length).
-
1 x Live Feed with 1.5m Lead & 2.1mm DC Barrel Connector.
-
1 x End Cap.
-
1 x VHB (Very High Bond) Double Sided Adhesive Tape.
-
Magnetic Adjustable Track Spots. (Select quantity required in the box below)
-
1 x Plug & Play LED Power Supply with 2m Mains Lead.
A cost effective and extremely small cross section 12VDC / 24VDC magnetic track system perfect for installing into cabinets and glass tower units where space is limited between glass panels and shelves.
The track is extruded from polycarbonate and can be screw fixed or installed using clear VHB acrylic tape that will adhere to all types of materials including glass, wood, coated mdf and aluminium.
|
 Beam Angle - 20 Degrees Cap/Lampholder - Non User Replaceable LED Cut Out - Surface Mount Finish - Silver Fixing - Screw Fix and/or VHB Tape
 IP Rating - IP20 Lamp - Non User Replaceable LEDs LED Colour - 4000K Length - 1000mm Material - Polycarbonate/Aluminium
 QTY per pack - 1 Voltage - 12VDC / 24VDC Width - 22mm
|
